Tubes: All Sizes/Types

Our Standard Presta Valve Tubes feature a molded method of construction that ensures a consistent thickness of butyl rubber. This means that they don't have any unnecessary weight and will roll smoothly, ride after ride. - Individually cured for consistent tube thickness = the utmost in quality.

Your little ones have a youthful, intrepid spirit that sees them riding wherever the wind takes them. Most of the time, however, it takes them straight through thorns and debris, leaving you with the unenviable task of changing out flat after flat. But with our Standard Schrader Valve Youth Tubes, you'll have the peace of mind that they're riding on tough tubes that are built strong to last. And to make sure of it, they feature a molded method of construction that ensures a consistent thickness of butyl rubber, meaning that they'll roll smooth and stay tough, ride after ride. Individually cured for consistent tube thickness = the utmost in quality.

These Giant tubes include flat sealant for reduced roadside maintenance.

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling. This tube features a 48mm-long valve stem ideal for deep-section rims.

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling. This tube features a 48mm-long valve stem ideal for deep-section rims.

The least expensive way to ditch 40+ grams of rotating weight is with our Turbo Talc Tubes. A patented, oversized 4.8cm valve base prevents tearing, while a partially threaded valve stem provides a clean interface with pumps. Our lightest and most supple tube offering, it's also been proven in rolling-resistance testing to reduce drag by as much as 13% per wheel. - Packed in talc for easier installation. - 4.8cm valve base prevents issues of valves tearing off. - Smooth at the top for easier pump head insertion and reduced wear on pump internals. - Thinner tube design saves approximately 40 grams of rotating weight. - Thickness: 0.6mm

The name Airstop says it all. Michelin's Airstop tubes use a proprietary butyl rubber so your tires keep their pressure longer. And, the reinforced valve stem seam is ultra sturdy, too. - 98g - 52mm valve length

Because it's hard to know when you're going to get a flat, it's always good to have extra tubes on hand. Specialized's Turbo Ultralight MTB Tube w/Talc is lightweight to save rotational weight. The Talc lets the tube move easier inside the tire for a better ride with fewer flats.

Schwalbe tubes retain air pressure considerably longer than standard tubes. The quality and purity of the rubber mixture directly affects the quality of the tube.

Schwalbe tubes retain air pressure considerably longer than standard tubes. The quality and purity of the rubber mixture directly affects the quality of the tube.

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling.

- Valve type: Schrader - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm

- Butyl rubber - Schrader valve - Valve core: Removable - Wall thickness: 0.9mm

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling.

Schwalbe tubes retain air pressure considerably longer than standard tubes. The quality and purity of the rubber mixture directly affects the quality of the tube. - Decreased air loss design - Butyl rubber - 40mm valve length

- Valve type: Schrader - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm

- Low Lead Valve - ISO Diameter: 355 - ISO Width: 44mm , 45mm , 46mm , 47mm , 48mm , 49mm , 50mm , 51mm , 52mm , 53mm , 54mm - Labeled Size: 18 x 1.75-2.125 - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 118g

Protection in any instance General purpose butyl inner tubes for everyday use. Standard inner tubes are made with high quality synthetic rubber with a wall thickness of 0.9 mm. Standard tubes offer good puncture resistance and a solid airtight performance in every instance.

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling.

- Size: 14 x 1.5 – 2.25 - ISO Width: 44 – 55mm - ISO Diameter: 254 / 14" - Wall Thickness: 0.9 - Shaft Type: Smooth - Valve: Standard Schrader - Valve Core: Removable - Tube Compound: Butyl

- ISO Diameter: 406 / 20" BMX - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Presta - Valve Shaft: Threaded - Valve Core: Removable

- Labeled Size: 24 x 1 - ISO Diameter: 540 / Wheelchair - ISO Width: 23mm, 24mm, 25mm - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Presta Short 32-40mm - Shaft Type: Threaded - Valve Core: Removable - Weight: 83g

- Size: 24 x 1-1/8 - ISO Diameter: 520 / 24" mini bmx - ISO Width (mm): 29mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Short 32-40mm - Valve Shaft: Threaded - Weight: 92g

- Size: 26 x 1-3/8 - ISO Diameter: 584 / 650b / 27.5" , 590 / 26 x 1 3/8" - ISO Width: 37mm - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 136g

- ISO Diameter: 584 / 650b / 27.5" - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded

- ISO Diameter: 584 / 650b / 27.5" - ISO Width: 52mm, 53mm, 54mm, 55mm, 56mm, 57mm, 58mm - Labeled Size: 27.5 - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Schrader - Valve Shaft: Schrader

- ISO Diameter: 622 / Road / 29" - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Presta - Shaft Type: Threaded - Valve Core: Removable

- Size: 650c x 18 – 23 - ISO Diameter: 571 / 650c - ISO Width: 18mm, 19mm, 20mm, 21mm, 22mm, 23mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 89-92g

- Size: 700c x 23 – 25 - ISO Diameter: 622 / road / 29" - ISO Width: 23mm, 24mm, 25mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 125g (32mm), 126g (48 & 60mm), 128g (80mm)

- ISO Diameter: 622 / road / 29" - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Length: Schrader - Valve Shaft: Smooth - Weight: 110g (23-25mm), 128g (28-32mm), 144g (35-43mm), 160g (40-45mm)